Satin gold milled steel E27 pendant lampholder

£19.99

Satin gold milled steel E27 pendant lampholder. A new modern etched metal E27 holder sold with matching cord grip. Ideal for making up a feature pendant light. This stylish design has a unique milled pattern engraved into the metal holder.

Description

Satin gold milled steel E27 pendant lampholder. A new modern etched metal E27 holder sold with matching cord grip. Ideal for making up a feature pendant light. This stylish design has a unique milled pattern engraved into the metal holder. If you want a bear statement LED lamp suspended from a simple pendant, then this feature lampholder would be a great choice. I have only just made these up and have already put them up on display in my showroom. I have them available in 3 unique finishes and they are getting lots of love.

Specification

Gunmetal grey 2G LED dimmer with gold diamond etched knob

£39.99

Gunmetal grey 2G LED dimmer with gold diamond etched knob. A stylish and modern dimmer plate, not your usual finish. This is an anthracite gunmetal and is very unique. The striking diamond etched contrasting dimmer knob really sets it off.

Description

Gunmetal grey 2G LED dimmer with gold diamond etched knob. A stylish and modern dimmer plate, not your usual finish. This is an anthracite gunmetal and is very unique. The striking diamond etched contrasting dimmer knob really sets it off. These are screwless so the front plate clips on and hides the fixings. They are also flatplate so you will need 35mm deep recessed back boxes to fit these flush. The LED dimmer module supplied is trailing edge and rated to 150 watts of LED. It includes a small mechanical potentiometer to adjust the dimming range.

Specification

Conduit box LED dimmer with diamond etched gold dimmer knob

£44.99

Conduit box LED compatible dimmer. Each dimmer comes with a branded Varilight Vpro dimmer module 0-120watts. They come fitted to a conduit end box. These new dimmer knobs have a gorgeous knurled pattern on them. They are very unique and look special.

Description

Conduit box LED compatible dimmer. Each dimmer comes with a branded Varilight Vpro dimmer module 0-120watts. They come fitted to a conduit end box. These new dimmer knobs have a gorgeous knurled pattern on them. They are very unique and look special. The diamond etched metal feels great and stands out. Each dimmer plate is made by hand in my Bristol workshop. I also make a great range of conduit toggle switches and spotlights. All designed and engineered to fit onto metal galvanised conduit. Ideal for urban and industrial designs.

Specification

Satin brushed gold fire rated GU10 downlight

Satin brushed gold fire rated GU10 downlight. This is a new finish I have released. Unlike the factory finished brushed chrome and white downlights you can pick up from a normal lighting supplier these are raw and urban. They would look great in a barn conversion or industrial space.

Description

Specification

Conduit box LED dimmer 0-120w aged gold front

£39.99

Conduit box LED dimmer 0-120w aged gold front. After the great success of my copper conduit LED dimmer I decided to make the same dimmer switch with an aged gold dimmer knob. Inside I have used the same Varilight 0-120 watt LED dimmer module.

Description

Conduit box LED dimmer 0-120w aged gold front. After the great success of my copper conduit LED dimmer I decided to make the same dimmer switch with an aged gold dimmer knob. Inside I have used the same Varilight 0-120 watt LED dimmer module. This is trailing edge and will dim up to 10 x LED lamps. The dimmer is fitted inside an industrial metal galvanised end box with a galvanised lid. This is ideal for urban and industrial lighting designs. It has a simple 20mm threaded entry and will fit on to any 20mm metal conduit.

Specification

Cheeky monkey feature side lamp with blue velvet shade

£120.00

An antique gold cheeky little monkey feature side lamp. Supplied with a beautiful blue brushed velvet lampshade. This lamp is 550mm tall and is very cute and eye catching. It would look great as a talking point on an office desk, something to break the ice or a conversation starter.

Description

An antique gold cheeky little monkey feature side lamp. Supplied with a beautiful blue brushed velvet lampshade. This lamp is 550mm tall and is very cute and eye catching. It would look great as a talking point on an office desk, something to break the ice or a conversation starter. It would also be great in a childs bedroom or nursery. I only have a limited amount of these lights available this side of Christmas so dont miss out. Each one takes a golf ball lamp SES cap. Ideally an LED. It also has an inline black switch for ease of use.

Specification

1 metre gold E27 pre wired pendant set

£44.99

A pre wired 1 metre pendant set. Supplied with black twisted fabric cable, a gold E27 threaded lampholder and a matte black ceiling rose. The lampholder supplied comes with two matching shade lock rings suitable for hanging a lampshade.

Description

A pre wired 1 metre pendant set. Supplied with black twisted fabric cable, a gold E27 threaded lampholder and a matte black ceiling rose. The lampholder supplied comes with two matching shade lock rings suitable for hanging a lampshade. The shade carrier hole should be 40mm wide to fit over this lampholder and tighten up. It is ideal for suspending my handmade velvet fabric lampshades. It comes fully wired and tested and ready to fit. It is also supplied with Wago branded snap fit connectors for an easy instalation. These simple gold pendants look amazing with a super decorative LED lamp.

Specification

Matte black and gold E27 threaded batton holder

£34.99

A handmade black batton holder with a gold finish threaded metal E27 lampholder. Ideal as a wall light or ceiling light. Two lock rings included so you could fit a lampshade, ideal for use with our hand made velvet lampshades if you want to fit them flush to the ceiling.

Description

A handmade black batton holder with a gold finish threaded metal E27 lampholder. Ideal as a wall light or ceiling light. Two lock rings included so you could fit a lampshade, ideal for use with our hand made velvet lampshades if you want to fit them flush to the ceiling. This is a stylish retro industrial design and is hand made in our Bristol workshop. Each batton holder comes with wago connectors for a quick and easy instal. This light comes with a 10 year guarantee.

Specification

Brass E27 threaded metal lamp holder

£14.99

English brass finish pendant lampholder ideal for vintage or industrial lighting designs. Supplied with 2 locking rings so you could fit a shade to this lampholder. E27 thread ideal for use with a squirrel cage or decorative globe lamp. Please note these holders are not supplied with cord grips.

Description

English brass finish pendant lampholder ideal for vintage or industrial lighting designs. Supplied with 2 locking rings so you could fit a shade to this lampholder. E27 thread ideal for use with a squirrel cage or decorative globe lamp. Please note these holders are not supplied with cord grips. We make and supply a range of metal or plastic cord grip that will simply screw into the back of this lamp holder.

Specification

Polished brass 7 way ceiling rose

£29.99

A beautiful hand finished polished brass decorative ceiling rose. We make this ceiling rose using 1.5mm thick steel so the weight and quality of this component is second to none. These ceiling roses are 100mm wide.

Description

A beautiful hand finished polished brass decorative ceiling rose. We make this ceiling rose using 1.5mm thick steel so the weight and quality of this component is second to none. These ceiling roses are 100mm wide. Each rose is supplied with a metal fixing bracket, earth lug and wago connectors for an easy installation. We supply this ceiling rose with black plastic cord grips or you can buy it with a matching brass metal decorative cord grip. Please choose from the drop menu.